Magnetic plate / Adhesive base, round 7.4cm for Füllguard "Black Edition" STYYL - super flat - ideal for storing the Füllguard or awning magnets on your van, camper, motorhome, and caravan, etc.
From an order value of 200 Euros, you pay no shipping fees.
STYYL magnetic boards in the "Black Edition" are not only for campervans, caravans and the like, but can also be placed in the home, office or workshop, for example.
Highlight: Thanks to the powder coating, you can write on the boards with chalk markers and simply wipe them off again.
The plates are therefore very stable and, including the adhesive fastening on the back, result in a thickness of only 2mm! Thus SUPER FLAT and SPACE-SAVING!
On the back, the magnetic boards are provided with nano adhesive pads. This makes them easy to install and later remove without leaving any residue! The magnetic boards are of course also ideal for other magnetic objects such as Silwy glasses, our magnetic hooks or shelves.
- Round Ø 7.4 cm (1 piece, adhesive strength 2.5 kg each)
Scope of delivery: Magnetic board (size of your choice) including nano adhesive pads
Important: the surface must be clean and free of grease/soap before gluing. Please refer to the enclosed assembly instructions! Handmade, despite careful processing, the item may show traces/scratches on the metal. The boards may show a curvature depending on the size, but flat mounting is still possible without any problems. In strong ambient heat, nano pads can also become soft and thus detach from the surface. The shape and number of pads may vary depending on the availability of our adhesive pad supplier 3M.
Magnetic board without magnetic force? That's right, our magnetic boards are an adhesive surface for magnets. This means you can attach individual magnets or our items equipped with magnets to the board. The plate itself is NOT a magnet!
Please note, no powder coating without a ground point. Therefore, there are various holes or/and a spot in/on the magnetic boards, here a spot can be "bare" and have no powder coating. This spot and the holes are unavoidable!
Dismantling the magnetic boards:
- Heat the magnetic board thoroughly with a hairdryer (please note the individual heat resistance of the surface)
- Starting from a corner, slowly loosen the magnetic board (a plastic tool can be helpful:
- Pull the board off the wall extremely slowly (not too abruptly so that the material does not bend)
- Before reassembling the magnetic wall, equip it with fresh nano pads (which you can find in the shop under accessories) and then observe the known assembly instructions.
Applicable conformity details for this product.
Responsible person for the EU.
The responsible party is the economic operator established in the EU, who is responsible for certain compliance obligations of the product.
STYYL GmbH
Gewerbestr. 4
88634 Herdwangen-Schönach
Germany
info@styyl.de